This is belt version of ЦЕХ RC DM family drift car. New arm mounts now similar to most of the factory rwd chassis. Nylon spacers together with 2.5mm shafts were used to eliminate unwanted friction.
Updated front module is here.
HSP diff is used. To decrease annoying and frustrated noise of flying fish optional 13t pinion is provided - replace metal one with it. Together with belt main pair it had decreased noise level to yokomo or mst. Now no one will guess which chassis you have on a track by sound.

Wheels

The rear track has been narrowed compared to DM1/2, so now staff offset for rear wheels is 6mm (3 and 9 is also acceptable). 6-7.5mm offset wheels is required for the front suspension

Key parts

2GT 16Teeth 6mm Timing Pulley Bore 3.175
2GT/GT2 Timing Belt 152t Width 6
2.5mm schaft;
Nylon Spacer M2.7 (OD 4mm), Length:4mm
Read drive shaft
M5 0.3/0.5 mm Ultra Thin Flat Washer
M3/M2 injection nuts
HSP 94123 flying fish universal joint steel shaft
m3 screews and nuts
m2.5 screews and nuts
Links

This list is not complete and is not detailed. It is assumed that you have HSP 94123 as donor.

Battery holder

Shorty battery holder is insignificantly redisigned original - mounting holes was extended to mount m3 screws freely (some m2.5 screws are still required), fillet radius was adjusted to match lipo hard case at FDM printing

Telegram: Цех RC

Wheels

Key parts

Battery holder

Updated files only on thingiverse!!! Cults downloads my files itself.

Дельцы 3D печати с авито как обычно лучше проходите мимо

"Drift car chassis" results