Sleek case designed for the Google Pixel 9 Pro XL

I used the source openscad file (https://makerworld.com/models/478570) to create a case with similar measurements of another slim case (https://makerworld.com/en/models/602408) but with a little more protection. I did borrow the camera protection piece from the slim case. Works great in PLA and PETG and likely any other non-flexible filament.

Note that the case is a tight fit. I found it easiest to put the camera protector on first and then get the bottom 2 corners of the case in (by the charge port) followed by the top corner opposite the buttons. Should snap right in.