Layer height 0.1, first layer 0.1, 100% infill printing
The label area size is 30mm*40mm, with 2mm rounded corners
The original file contains an F3D file, which can be further created using Fusion360
The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing
To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed
0.1mm layer, 0.1mm first layer, 100% infill
The label area size is 30mm*40mm with 2mm rounded corners
Click the Raw Model Files button to download the F3D file, Edit with Fusion360
The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing
To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed
